Custom Washers

For over a century, Phoenix Specialty has manufactured precision washers for a wide variety of different end uses and industries. From top-of-the-line racing and sports cars, to innovative aircraft engines and space-worthy vehicles, the sky is not the limit for where our washers can take you and your business. Whatever the project, we can create the exact washers your design demands.

We specialize in tight tolerances and low to medium volume runs. We can manufacture your custom washers within the following specifications:

  • Outside diameters from .05″ to 6″ (Stamping)
  • Outside diameters up to 15″ (Water Jet)
  • Thickness from .0005” to .260”
  • Over 300 different raw materials in stock

Need to source low volume stamped parts affordably? We manufacture your specialty parts – exactly to your specifications – with no tooling charges or hidden fees.

We take quality seriously here at Phoenix Specialty. Our parts are fully traceable, and every washer we make meets the AS9100 and ISO 9001 standards.

At Phoenix Specialty, we make sourcing precision washers easy!

Types of Washers

*Our manufacturing capabilities are not limited to this list. This is just a sampling of what we can do for our customers.

Other Common Terms for Our Washer Products:

Aerospace washers, Aircraft washers, Angled flat washers, Automotive blanks, Belleville spring washers, Bent tab washers, Bent washers, Bronze washers, C washers, Conical spring washers, Conical washers, Counter sink washers, Countersunk washers, Cupped washers, Curved washers, Custom metal washers, Custom washers, Cut washers, D hole washers, D washers, Delrin washers, Domed washers, External keyway washers, Flange washers, Four wave washers, Hardened washers, Hexagon hole washers, Hexagon washers, Internal keyway washers, Internal tab washers, Lock washers, Locking washers, Metal hole washers, Metal spring washers, Metric washers, Multiple hole washers, Non-metalic washers, Nord lock washers, Notched washers, Off-center washers, Oval hole washers, Oval washers, Radius edge washers, Raised washers, Rectangular hole washers, Rectangular washers, Round metal washers, Round washers, Serrated washers, Special washers, Spherical washers, Split washers, Spring lock washers, Spring retainer washers, Square hole washers, Stainless washers, Tab washers, Tapered washers, Three wave washers, Tooth washers, Washers, Wave spring washers, Wave washers, Wavy washers

About Washers

They are such a small piece to the puzzle, but nonetheless, washers play a big role in the overall picture. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID). Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied. Rubber or fiber gaskets used in taps (or faucets, or valves) to stop the flow of water are sometimes referred to colloquially as washers; but, while they may look similar, washers and gaskets are usually designed for different functions and made differently. Washers are also important for preventing galvanic corrosion, particularly by insulating steel screws from Aluminum surfaces.